1000 lph ro plant price, Reverse Osmosis Water Treatment technology is the best solution to purify your water. Before buying RO Water Plant, you have to be sure your raw water quality. Reverse Osmosis System is pressure driven process, and how many bar pressures does your system need, depends on your raw water quality. Here, we explain this one, every water has some minerals, inorganic and organic matters, anion, cation, biological organism inside. Below, there is a typical water analysis report. So, if you have this kind report, also you can understand with little knowledge, what kind of system you need?
Water Analysis Report for 1000 LPH RO Plant Price
First, from this report, you have to check what is your water TDS (Total Dissolved Solid), to understand TDS more, please watch our video : What is TDS and Conductivity? As regards to TDS, we categorized water.
| TDS in ppm | Water Quality |
|---|---|
|
0-1000ppm |
Fresh Water |
|
1000-10000 |
Brackish Water |
|
20.000-45.000 |
Sea Water |
|
45.000-100.000 |
Brine Water |
Water Hardness Level for Reverse Osmosis
Second, we check hardness of water and we decide system need water softener system or not ? Below there is table some countries use a unit grain (gpg: grain per gallon), some countries use ppm (part per million or mg/l milligram per liter) for 1000 lph ro plant price.
One grain per gallon (gpg) is equivalent to 17.14 parts per million (ppm). 1 ppm = 1 mg/l
Turbidity Level for Reverse Osmosis Plant
And also, we check, how is our watercolor from Turbidity level, from below table you can see the how we can categorize your watercolor with turbidity. So, turbidity gives us idea for pretreatment and chemical dosing.
Other water analysis report data is very technical, to get more info about how to rid of iron, ammonium, algae…etc. So, it is better to contact with us to get best solution for your water source for 1000 LPH RO plant price.
Parts of 1000 LPH RO Plant Price
Now, we explain parts of 1000 LPH Reverse Osmosis Water Treatment Plant:
As regards to raw water analysis report, we cannot use all material because of some matters in water are corrosive. So, if TDS is less than 1000ppm, we can use FRP, Stainless Steel 304,316 without any problem but, for higher TDS we suggest using FRP or carbon steel material especially for sand and activated carbon filter tanks.
Sand and Carbon Filters for 1000LPH RO Plant
First, Tank is Sand Filter, we are putting quartz sand or other media sand, depends on your water analysis report. So, Sand filtration is used for the removal of suspended matter, as well as floating and sinkable particles.
The second tank is activated carbon filter tank. Hence, carbon filters remove contaminants through adsorption. Absorption soaks up particles like a sponge to water. So, adsorption adheres particles to a surface like a piece of Velcro. Organic compounds bond or stick to the surface of a carbon filter because water and contaminants are both polar compounds that attract one another. Meanwhile, activated Carbon is tasked with removing chlorine, odor, and color from water as well as controlling the taste. Activated carbon simply eliminates impurities, viruses, soluble gases, and particles that are larger than 0.5 microns. So, activated carbon filter media comes in several types: coal based, wood based, and coconut based each consisting of various particle sizes, base materials and activity for 1000 LPH RO plant price.
Softener Tank for 1000LPH Reverse Osmosis System
The third tank is water softener tank. Here, there is ion exchange resin inside. So, water softener systems work in removing magnesium and calcium found in the water by replacing them with sodium ions. As the hard water is introduced in the mineral tank, it meets a bed of resin beads that grab hold of the mineral ions, which effectively releases the sodium ions. There is a small regeneration tank and we put inside Sodium salt, when your resin ion exchange capacity become less manual or automatically regenerate your ion exchange resin with sodium salt. To understand this process, we suggest you watch our video.
Now, we see different material, different configuration of 1000lph RO Water Plant photos:
To get offer for 1000 lph ro plant price, please contact with us.
Also, you can calculate 1000 LPH Reverse Osmosis Plant price with Chunke Cost Calculator. Here there is a video to help you to calculate and get the cost.
We design this calculator, if you are thinking to open water refilling station. There are 1000 lph ro plant cost and other initial cost. Please kindly watch our video.
If you have question about ro water plant cost or technical, please contact with us by filling form below.
